Filter
Top Products
Item Capacity
Ford part name or
equivalent
Ford part number /
Ford Specification
Windshield washer fluid 4.0 quarts (3.8L)
Motorcraft Premium
Windshield Washer
Concentrate
ZC-32-A /
WSB-M8B16-A2
Fuel tank
16.0 gallons
(60.6L)
——
1
Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification
EST-M2C118-A for complete refill of Traction-Lok axles.
Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle
has been submerged in water.
2
Automatic transmissions that require MERCON V should only use MERCON V fluid. Refer to
scheduled maintenance information to determine the correct service interval. Use of any fluid
other than the recommended fluid may cause transmission damage.
3
Add the coolant type originally equipped in your vehicle.
4
Approximate dry capacity, including cooler and tubes. Fluid level should be checked by an
authorized dealer.
5
Service refill capacity is covered under checking and adding manual transmission fluid in this
chapter.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (4.6L) and the API
Certification mark.
2009 05+ Mustang (197)
Owners Guide
USA (fus)
Maintenance and Specifications
281