Filter
Top Products
Airflow Meter
Recall
19
3. Press I to clear all samples. The Meter beeps and the display shows 0 samples.
4. To exit (CLEAR) or (CLEAR ALL) without deleting samples, press P, V, or
F before pressing I
Recall
1. Press either P, V, or F to recall samples for that mode.
2. Press A.
3. Press I (RECALL) to recall samples. Use D and E to locate the desired
sample. Hold E or D to increase the rate of change.
4. Press P, V, or F to exit the Recall menu.
Maintenance
This section provides basic maintenance information, including battery replacement
instructions.
WCaution
Do not attempt to repair or service the Meter unless qualified to do so and
have the relevant calibration, performance test, and service information.