Filter
Top Products
922
Users Manual
10
Temperature
Ambient temperature is displayed on the Meter as a reference. The temperature can be
displayed in either °C or °F. See "The Setup Menu".
Secondary Menu Modes
Use A with other select pushbuttons to shift to secondary menu modes and functions:
• Press A and then H to access the Clear functions. See “Clearing Sample Data”.
• Press A and then I to access the Recall menu. See “Recall”.
• Press A and then Gto access the Clear All function. See “Clearing Sample
Data”.
Zero
To zero differential pressure, velocity or flow, have both pressure ports open to ambient
conditions, then, press and hold Zfor 2 seconds. Upon zeroing, the meter beeps.
Min Max Avg
The Min Max mode stores live minimum (MIN) and maximum (MAX) input values. When the
input drops below the stored minimum value or above the stored maximum value, the Meter
beeps and stores the new value. Min Max mode also calculates an average (AVG) of all
readings taken since the mode was activated. This mode can be used to capture