13
T6137pr-0920
ASSEMBLY
Light Covers
18
Fit the light covers to the top of the sport bar, •
as shown.
Insert a #10 x ¾" screw into each light cover •
and tighten.
17
Fit a support to one side of the sport bar.•
Insert a #8 x •
5
/8" screw through the support, the sport
bar and out through the support.
Fit a #8 acorn lock nut to the end of the screw.•
While holding the acorn lock nut with an adjustable •
wrench (or pliers), tighten the screw.
Repeat this procedure to fasten the other support to •
the sport bar.
Sport Bar
Sport Bar Supports