10
T6137pr-0920
End of
Steering
Column
Steering
Column
Cap
BOTTOM VIEW
8
Turn the vehicle on its side.•
Fit the steering column cap onto the end of the •
steering column.
Insert a #10 x ¾" screw through the hole in the •
steering column cap and steering column.
While holding the steering column cap in place, •
tighten the screw.
Turn the vehicle upright.•
ASSEMBLY
Hood Latches
Hood Tabs
Slots
Slots
10
Insert the tabs on the hood into the slots in the front •
end of the vehicle.
Pull the hood forward and lower it closed.•
Turn the hood latches ¼ turn to secure the hood.•
#10 x
3
/
4
"
Screw
FRONT VIEW
9
Insert a hood latch into one of the slots near the hood •
on the front of the vehicle.
Twist the base of the hood latch ¼ turn to secure it to •
the vehicle.
Repeat this procedure to attach the other hood latch to •
the vehicle.