Filter
Top Products
17
Assembly
Slots
Slots
Roll Bar
Tabs
Vase
Plug
Flower
• Fit the six tabs on the roll bar into the slots in the top,
rear edge of the vehicle.
• Push near each tab in until the roll bar “snaps”
into place.
25
Hood
Large
Tab
Large
Tab
Front Tab
Slot
Slot
Slot
• Fit the large tab on each side of the hood into the slots
in the front end of the vehicle.
•Now, push to “snap” the small tab on the front of the
hood into the slot in the front end of the vehicle.
26
• Fit the plug on the flower into the vase on the dash.
Hint: If you’d like to fasten the flower to the vase, insert
a #8 x
3
/4" screw into the bottom of the vase and tighten.
27
24
Steering
Wheel Tab
Steering
Wheel Cap
Notch
• Align the notch in the top of the steering wheel cap with
the tab in the center of the steering wheel and fit the
cap into the steering wheel.
• Insert two #6 x 1" screws into the steering wheel cap
and tighten the screws.