Filter
Top Products
Assembly
15
Fasteners
Seat Center Slots
Long Seat Belt
Seat
Tabs
Tabs
Slots
Slots
Slot
•Turn the seat face down on a flat surface.
•Position the long seat belt so the fasteners face each
other, as shown.
• Insert each end of the long seat belt through the two
center slots in the seat bottom.
•Position the two short seat belts so the fasteners face
each other, as shown.
• Insert the fastener ends of the short seat belts through
the slots in each side of the seat bottom.
• Pull the short seat belts completely through the slots
until the last T-loop at the opposite end of the belt
catches against the slot.
Note: You will pull one T-loop through the slot.
13
Short Seat Belt
Fasteners
Last T-loops
Side
Slot
Side
Slot
14
• Fit the six tabs on the bottom edge of the seat into the
slots inside and on the top edge of the vehicle.
• Push down near each tab until the seat “snaps”
into place.
14
•Turn the vehicle on its side.
•Insert four #8 x
3
/4" screws into the holes in the bottom of
the vehicle. Tighten the screws.
16
Bottom View