Filter
Top Products
11
P5920pr-0920
ASSEMBLY
12
• Insert four #8 x ¾ " screws into the dash assembly and tighten.
• Fit the dash assembly onto the posts near the front end of
the vehicle.
11
13
• Insert two black #8 x ¾ " screws into the dash assembly
as shown and tighten.
Posts
PostsPosts
BACK VIEW
• Fit a mirror and mirror cover to an end of the dash assembly.
Hint: Each mirror and mirror cover only fit on one side of the
vehicle. If they do not seem to fit, try assembling on the
other side.
• Insert two #8 x ¾ " screws into the mirror cover and tighten.
• Repeat this procedure to attached the other mirror and mirror
cover to the opposite end of the dash assembly.
Mirror
10
Mirror Cover
Dash Assembly