Filter
Top Products
M7873pr-0920
11
Battery
Retainer Straps
Power Wheels
®
12 Volt Battery
12V BATTERY INSTALLATION
• Plug the motor harness connector into the battery.
3
PRESS
L
I
F
T
1
• Press the tab under the back edge of the seat and lift to
remove the seat.
4
• Secure the fasteners on the battery retainer to hold the
battery in place.
• Fit the tab at the front of the seat into the slot near the sound
button
A
.
• “Snap” the tab at the back of the seat into the slot near the
rear of the vehicle
B
.
A
B
IMPORTANT! Use only a Power Wheels
®
12 volt lead-acid
rechargeable battery. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least 18
hours using the enclosed Power Wheels
®
12 volt charger before
operating your vehicle for the first time. Charge the battery for
at least 14 hours after each use of the vehicle. Never charge the
battery longer than 30 hours. Failure to follow these instructions
may damage your battery and will void your warranty.
Motor
Harness
Connector
• Unfasten the battery retainer straps to access the
battery compartment.
• Place the battery upright in the battery compartment.
2
Battery
Retainer Straps