Filter
Top Products
12
12
13
• Fit the four fenders marked 1, 2, 3 and 4, to the vehicle,
as shown.
Hint: The fenders are designed to fit the vehicle one way.
• Make sure the peg on the inside edge of each fender fits into
the lower hole inside each wheel well.
1
2
3
4
14
• Fit three screws into the top of each fender and tighten.
TOP VIEW
• Fit the front grille assembly to the vehicle.
• Insert four screws into the front grille assembly and tighten.
11
12
• Fit the front grille to the grooves in the top of the brush guard,
as shown.
• Inset three screws through the front grille and into the brush
guard. Tighten the screws.
Front Grille
Brush Guard
FRONT VIEW
K7112pr-0920