Filter
Top Products
J4394a-0921
12
15
• Fit the four fenders marked 1, 2, 3 and 4, to the vehicle,
as shown.
Hint: The fenders are designed to fit the vehicle one way.
• Make sure the peg on the inside edge of each fender fits into
the lower hole inside each wheel well.
1
2
3
4
16
• Fit three screws into the top of each fender and tighten.
TOP VIEW
• Wipe the steering column with a paper towel to remove any
excess lubricant.
• Insert the curved end of the steering column down through the
opening in the dash and then down through the hole in the
vehicle floor.
Hint: You may need to turn the steering column to fit it through
both openings.
• Carefully turn the vehicle over.
• Insert the curved end of the steering column through the hole
in the steering linkage.
BOTTOM VIEW
18
17
Steering Column
Steering Linkage
Steering Column
INSIDE VIEW