Filter
Top Products
N1476pr-0920
12
ASSEMBLY
F
N1476pr-0920
Fit a grab bar onto each side of the vehicle, as shown. •
Insert a #10-32 x 1" screw through the hole in each grab bar
and into the seat. Tighten the screw.
•
Turn the vehicle on its side.
Insert four #10 x ¾" screws in the holes (in front of and
behind each rear wheel) in the underside of each rear wheel
well, through the vehicle and into the ends of the grab bars.
Tighten the screws.
•
•
BOTTOM VIEW
15
16
17
Grab Bars
Grab Bars
#10 x ¾" Screws
#10 x ¾" Screws