Filter
Top Products
Assembly
14
16
• With the seat at an angle, insert the tabs on the front
edge of the seat into the slots in the foot-well wall .
• Push down firmly on the edge of the seat above each
tab to snap the tabs into the slots .
• Rotate the back of the seat down to snap the seat
back tabs into the slots in the vehicle body. Push down
firmly on the seat back.
3
2
1
Seat
Tabs
Seat Back Tabs
Slot
1
2
3
PUSH
HERE
18
17
• Using safety scissors, remove the sport bar brackets
from the plastic connector. Dispose of the plastic
connector.
• Position the sport bar upright.
• Position a sport bar bracket above one of the sport bar
side legs, as shown.
• Insert the tab on the inside of a sport bar bracket into the
hole in the sport bar side leg.
• Fit the ring on a sport bar support against the end of the
sport bar bracket.
• Fold the sport bar bracket over the sport bar to close it
around the sport bar and sport bar support.
Sport Bar
Sport Bar Bracket
Sport Bar Support
Tab
#8 x 1" Screw
Hole
Side Leg
Ring
19
• Insert a #6 x 1
1
/
2
" screw into the sport bar bracket
as shown.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
• Repeat steps 18 and 19 to attach the other sport bar
support to the other sport bar side leg.
• Insert a #8 x 1" screw into the rear of seat as shown.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
Sport Bar Bracket
Sport Bar
Sport Bar Support