Filter
Top Products
COOL
HEAT
8
7
6
Dash
Knob Plate
Key Assembly
13
• Snap the dash knobs into the knob plate. (See inset.)
Note: Gently squeeze the tabs on the knobs together
before inserting the knobs into the knob plate.
• Position the bottom edge of the knob plate in the opening
in the dash.
• Snap the top of the knob plate into the dash.
• Snap the key assembly into the dash.
Microphone
Dash
• Insert the end of the microphone cord though the hole
under the dash and into the hood area.
• Place the microphone in the dash pocket.
Assembly
• Apply labels to the dash as indicated in the illustration.
• For best results, make sure your hands are clean and dry
and that the areas of the dash to which labels will be
applied are free of dirt and oils. Avoid repositioning a
label once it has been applied.
10
22
11
7
14
13
12
8
23
5
Battery
Compartment
Dash
• Position the dash on the vehicle body.
• Insert a #10 x
1
/
2" screw through each of the two corner
dash tabs nearest to the passenger compartment .
• Insert a #10 x 1" screw through the two dash tabs
nearest to the battery compartment .
• Insert a #10 x 1" screw into the hole in the center of the
dash, near the battery retainer clip .
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
11
2
11
2
11
1
Battery
Retainer
Clip
11
1
11
1
11
2
11
2
11
2
11
2
11
1