Filter
Top Products
Steering
Column
Steering
Linkage
Hole
Guides
• Turn the vehicle body on its side.
• Insert the curved end of the steering column into the hole
in the steering linkage. Make sure the steering column
is positioned between the guides on the underside of
the vehicle body.
13
Bottom View
Steering
Column
Steering Column
Bushing
Vehicle
Body
Rectangular
Opening
• Position the vehicle body upright.
• Insert the curved end of the steering column through the
rectangular opening in the vehicle body.
• Rotate the steering column bushing
1
/
4
turn and fit it into
the rectangular opening in the vehicle body.
• Position the handlebar upright.
• Fit a handgrip onto each end of the handlebar.
Hint: If the handgrips are difficult to slide onto the handle-
bar, moisten the handgrips with warm water before fitting
them onto the handlebar.
• Apply labels #10 to the handlebar, as shown.
Steering
Column
Steering Column
Bushing
• Wipe the steering column with a paper towel to remove
any dirt or oils.
• Fit the steering column bushing onto the straight end of
the steering column.
Assembly
11
12
10
Handlebar
Handgrip
Handgrip
Handlebar
9
10
10