Filter
Top Products
®
• Lift the hood.
• Place the battery in the battery compartment. Make sure
that the battery connector extends toward the motor har-
ness connector.
Battery
Motor
Harness
Connector
Hood
Battery
Connector
1
®
• Squeeze the tabs on each side of the motor harness
connector.
• Plug the battery connector into the motor harness
connector.
Note: If the battery connector will not plug into the motor
harness connector, turn it over and try again. Do not force
the battery connector into the motor harness connector.
Motor
Harness
Connector
Battery
Connector
2
• Fit the pretend engine cover over the battery, motor
harness connector and battery connector.
• Insert two #8 x 18 x 1” fasteners through the holes in the
pretend engine and into the vehicle body.
• Tighten the fasteners with a Phillips screwdriver. Do not
over-tighten.
Pretend
Engine
Cover
3
• Lower the hood.
• Lift the hood latches and fit the short tabs onto the
notches on the hood to fasten it.
Hood
Hood
Latches
4
16
Battery Installation/Pretend Engine Assembly
H