Fisher-Price 72607 Motorized Toy Car User Manual


 
•Lower the vehicle body.
•Fit a bushing, narrow side down, onto the exposed end
of the "A" front axle and into the hole in the vehicle
body.
Fit a cap nut onto the end of the "A" front axle.
Fit a cap nut tool over the cap nut and tap the center
with a hammer until the cap nut is secure.
Repeat assembly steps and to assemble the
"B" front axle to the side of the vehicle body marked "B".
Dispose of the cap nut tools properly.
8
9
Assembly
9
Cap Nut
Cap Nut Tool
"A"
Front
Axle
Bushing
Vehicle Body
•Position the handle over the rear of the vehicle body so
that it leans away from the vehicle body.
While keeping the vehicle body stationary, insert and
snap the handle into the two holes in the rear of the
vehicle body.
10
Hole
Rear of
Vehicle
Body
Hole
Handle
5
Make sure the areas where the labels will be applied
are clean and dry.
Apply the labels as shown in the illustrations.
•For best adhesion, try to avoid applying a label more
than once.
One-time assembly is now complete.
1
2
10
9
7
8
3
4
65
Front View
Back View
Bushing