Faria Instruments IS0152 Automobile Parts User Manual


 
Selecting the Speedometer Units.
Press and hold the “MODE” button until
the Pilot beeps to select the Edit Mode.
Continue pressing the “MODE” button
quickly until the lower display reads “Un”
(units).
Press either the “Up or Down”: arrow
button to move the function indicator to
the desired units either Miles per Hour
(MPH), or Knots (KTS).
Calibrating the Speedometer:
Press and hold the “MODE” button until
the Pilot beeps to select the Edit Mode.
Continue pressing the “MODE” button
quickly until the lower display reads “C”
(calibration). Press either the “Up” or
“Down” arrow button to change the speed
reading to the desired speed.
Distance Log
Selecting the Distance Log Function:
Press the “MODE” button and activate the
Select Mode.
Press the “Down” arrow to select the
lower display.
T1 T1
S
KL
D
F
FA
M
DIS
KTS
MPH
T1 T1
S
KL
D
F
FA
M
DIS
KTS
MPH
T1 T1
S
KL
D
F
FA
M
DIS
KTS
MPH
Page 10