Filter
Top Products
Alarm Mode LINE DISPLAY
The “Alarm” screen will appear if a local alarm or an
engine alarm occurs.
The local alarm is “Low Fuel”.
Only two engine alarms appear automatically, “Check
Engine” and “Engine Emergency Stop”. Follow the
instructions provided to view more information about
engine alarms.
LOW FUEL
Displays “Low Fuel” warning.
Red LED blinks.
Horn “Beeps”.
1
Low
Fuel
!
2
3
Press “Mode” to turn off LED, silence alarm horn, and
return to “Run” mode. Alarm will reactivate in 15 minutes
but can continue to be deactivated as required.
ENGINE WARNINGS
Any engine alarm except “Engine Emergency Stop”
Red LED blinks.
Horn “Beeps.”
1
CHECK
ENGINE
!
2
3
“Engine Emergency Stop” alarm.
Red LED on continuously.
Horn on continuously.
1
ENGINE
EMERGENCY
STOP !
2
3
Alarm Mode
The “Alarm” screen appears only if
an alarm condition exists. The alarm
condition may be a warning sent from
the engine ECU or a “Local” alarm such
as “Low Fuel”. When an alarm condition
occurs, the “Alarm Screen” will appear
and the screens described below will be
displayed.
The descriptions below also explain how
to temporarily override the alarm screen
and audible / visual warnings and return
to “Normal” mode. In all cases, the
alarm will re-occur after a period of time
to ensure that the user remembers the
alarm condition.
Once an alarm condition has been
corrected, the alarm screen, horn,
and warning lights will no longer be
displayed.
Page 19