![](http://pdfasset.owneriq.net/7/4d/74db6665-d031-4cde-ba76-b9c63e54bda9/74db6665-d031-4cde-ba76-b9c63e54bda9-bgd.png)
Set “Amount of Fuel”
1
Set
Amount
Of Fuel
2
3
NOTE: If a known amount of fuel is in the fuel tank but
it is not full, this function can be used to indicate the
amount of fuel available. The “Fuel Left” function will
then use the amount of fuel entered to calculate the “Fuel
Left.”
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Current Amount of Fuel.”
Press “Up” or “Down” to set the amount of fuel known
to be in the fuel tank. Adjust until the displayed volume
matches the known amount of fuel in the tank.
When the volume is correctly set, Press and hold the “Up”
and “Down” buttons for 2 seconds to save and exit.
1
Fuel
Amount
XXX G
2
3
Organize User Screens
1
Organize
User
Screens
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Organize User Screens.”
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Organize Screen 1
1
Set up
Screen
1
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Organize Screen 1.”
Press “Up” or “Down” to select another screen or “Mode”
to return to “Edit” mode.
Refer to the list of available functions in the ownerʼs
manual. Press and hold “Up” or “Down” to select the
number of the function to be displayed in screen 1, line 1.
1
Screen 1
Line 1
Item XX
2
3
Page 9