Filter
Top Products
1. Use the wrench (included) to
unscrew the nuts on the battery
cover.
2. Assemble the battery cover
with the nuts and bolts in place.
3. Place the nut onto the bolt and
then into the battery compartment.
4. Insert 6 D-cell (not included)
batteries in the battery compart-
ment, matching the polarity
(+ and -) with the diagram in the
compartment.
5. Align the battery compartment
cover by matching inside.
6. Fasten the nuts with the
wrench. It is generally best to start
at the two nuts directly across
from the handle, then the two nuts
on both sides of the handle, then
the remaining two.
Assembling your Motorized Bumper Boat
Once you have properly inflated the Bumper Boat, you can begin
assembling the motor and steering wheel.
4