Filter
Top Products
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7177
ENGINE: Chrysler 340-360 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs.
Use only recommended Edelbrock Sure Seat Valve
Springs #5777.
Use stock ratio rocker arms only.
Duration at .006" Lift: Intake 308Þ Exhaust 318Þ
Duration at .050" Lift: Intake 234Þ Exhaust 244Þ
Lift at cam: Intake .325" Exhaust .340"
Lift at valve: Intake .488" Exhaust .510"
Timing at .050 Lift:
Open Close
Intake 10Þ BTDC 44Þ ABDC
Exhaust 59Þ BBDC 5Þ ATDC
Intake Centerline: 107° Lobe Separation: 112°
• CAUTION: Use Edelbrock Performer-Plus Timing Chain
and Steel Gear Set #7803. Do not use late model timing chain
and gear sets that are designed for emission-controlled
engines. These timing sets are machined in a retarded position
and are not recommended for this camshaft installation.
Edelbrock Timing Sets feature three keyways for specified
timing selection.
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7177
ENGINE: Chrysler 340-360 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs.
Use only recommended Edelbrock Sure Seat Valve
Springs #5777.
Use stock ratio rocker arms only.
Duration at .006" Lift: Intake 308Þ Exhaust 318Þ
Duration at .050" Lift: Intake 234Þ Exhaust 244Þ
Lift at cam: Intake .325" Exhaust .340"
Lift at valve: Intake .488" Exhaust .510"
Timing at .050 Lift:
Open Close
Intake 10Þ BTDC 44Þ ABDC
Exhaust 59Þ BBDC 5Þ ATDC
Intake Centerline: 107° Lobe Separation: 112°
• CAUTION: Use Edelbrock Performer-Plus Timing Chain
and Steel Gear Set #7803. Do not use late model timing chain
and gear sets that are designed for emission-controlled
engines. These timing sets are machined in a retarded position
and are not recommended for this camshaft installation.
Edelbrock Timing Sets feature three keyways for specified
timing selection.
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7177
ENGINE: Chrysler 340-360 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs.
Use only recommended Edelbrock Sure Seat Valve
Springs #5777.
Use stock ratio rocker arms only.
Duration at .006" Lift: Intake 308Þ Exhaust 318Þ
Duration at .050" Lift: Intake 234Þ Exhaust 244Þ
Lift at cam: Intake .325" Exhaust .340"
Lift at valve: Intake .488" Exhaust .510"
Timing at .050 Lift:
Open Close
Intake 10Þ BTDC 44Þ ABDC
Exhaust 59Þ BBDC 5Þ ATDC
Intake Centerline: 107° Lobe Separation: 112°
• CAUTION: Use Edelbrock Performer-Plus Timing Chain
and Steel Gear Set #7803. Do not use late model timing chain
and gear sets that are designed for emission-controlled
engines. These timing sets are machined in a retarded position
and are not recommended for this camshaft installation.
Edelbrock Timing Sets feature three keyways for specified
timing selection.
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7177
ENGINE: Chrysler 340-360 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs.
Use only recommended Edelbrock Sure Seat Valve
Springs #5777.
Use stock ratio rocker arms only.
Duration at .006" Lift: Intake 308Þ Exhaust 318Þ
Duration at .050" Lift: Intake 234Þ Exhaust 244Þ
Lift at cam: Intake .325" Exhaust .340"
Lift at valve: Intake .488" Exhaust .510"
Timing at .050 Lift:
Open Close
Intake 10Þ BTDC 44Þ ABDC
Exhaust 59Þ BBDC 5Þ ATDC
Intake Centerline: 107° Lobe Separation: 112°
• CAUTION: Use Edelbrock Performer-Plus Timing Chain
and Steel Gear Set #7803. Do not use late model timing chain
and gear sets that are designed for emission-controlled
engines. These timing sets are machined in a retarded position
and are not recommended for this camshaft installation.
Edelbrock Timing Sets feature three keyways for specified
timing selection.