Edelbrock 641540 Automobile Parts User Manual


  Open as PDF
of 6
 
©
2007 Edelbrock Corporation
Brochure No. 63-641540
Catalog #641540
Rev. 10/07 - AJ/mc
Page 1 of 5
RUSSELL FORD 5.0L COMPLETE EFI
PLUMBING KIT
Catalog #641540
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new complete fuel system kit. If you have any questions, please call
our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us at
Edelbrock@Edelbrock.com.
❑ 1 Edelbrock Fuel Pump #1790
❑ 1 Edelbrock Fuel Pressure Regulator Kit #1728
❑ 1 Edelbrock Electric Fuel Pump Relay Kit #1795
❑ 2 Russell 3/8” NPT x -6 AN male adapter
❑ 2 Russell 3/8” NPT x -8 AN male adapter
❑ 1 Mustang 5.0 Fuel Rail Kit
❑ 2 -8 AN black dry sump union
❑ 3 -6 AN black dry sump union
❑ 12 Tie wraps
❑ 1 10 Micron fuel filter, -10 AN I/O
❑ 1 Billet Y-block -10 AN inlet, -8 AN outlets
❑ 5 -10 AN straight x -8 flare reducer
❑ 1 0-100 psi fuel pressure gauge
TOOLS & SUPPLIES RECOMMENDED
❑ Basic hand tools ❑ AN Wrenches
❑ Miscellaneous hardware for mounting components ❑ EFI Fuel line disconnect tool
❑ Drill motor & bits ❑ Multimeter or test light
❑ Wire crimpers or soldering equipment ❑ Wire strippers
❑ Extra wire (Red & Black, 12 gauge & 18 gauge) ❑ Wire terminals & connectors
❑ 10A inline fuse ❑ Assorted nuts & bolts
❑ 1 Russell assembly lube/sealant
❑ 20 ft. Russell -8 hose
❑ 20 ft. Russell -6 hose
❑ 10 Russell -6 cushion clamps
❑ 10 Russell -8 cushion clamps
❑ 3 -6 AN Straight hose end
❑ 4 -8 AN Straight hose end
❑ 1 -6 AN 45° Swivel hose end
❑ 2 -8 AN 45° Swivel hose end
❑ 2 -6 90° Swivel hose end
❑ 4 -8 90° Swivel hose end
❑ 10 ft. Russell 3/16” Wrap-It wire protective sleeve
❑ 10 ft. Russell 5/16” Wrap-It wire protective sleeve
KIT CONTENTS
WARNING!
Gasoline and gasoline fumes are extremely flammable. Work in a well-ventilated area away from open flames,
sparks, or other sources of ignition. Try to contain gasoline when connections are loosened, and clean up any
spills immediately. Failure to do so can result in a fire or explosion.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in
poor performance and engine or vehicle damage.
next