Filter
Top Products
92
92
Reference
Necessary Information
If the following messages appear, check the status again, referring to the cause and action.
(PND) : Displayed on the PND screen.
(LCD) : Displayed on the Sub-display.
If the Following Messages Appear
Message Cause Action
In CD/MP3 WMA/DVD mode
DISC CHECK (PND)
INF3 (LCD)
DISCS ARE DIRTY OR
DAMAGED
The loaded disc is dirty or upside
down. Check it for proper
orientation and verify it is clean.
DISC CHECK (PND)
INF5 (LCD)
CD PLAYER FAILS
MECHANICALLY
The CD player is inoperative for
some reason.
DISC ERROR (PND)
INF6 (LCD)
WHEN THE CD PLAYER
INTERNAL TEMPERATURE IS
HIGH (TO PROTECT PICKUP
UNIT)
● The temperature in the CD
player is too high for operation
to continue. Wait till it cools
down.
● Resume playing after the
“High temperature sensed and
CD stopped” message
disappears. If the CD still
cannot play, have your dealer
repair it.
DISC ERROR (PND)
INF7 (LCD)
AN INTERNAL POWER SUPPLY
FAILURE IS OCCURRING
● Turn the ACC off once before
turning it on once again to
resume operation.
● If this condition persists,
please contact your dealer.
NO SUPPORT (PND)
ERR (LCD)
NO CORRECT FILE IN CD Confirm the file.
DISC CHECK (PND)
INF3 (LCD)
The CD/MP3 WMA/DVD is dirty,
scratched, warped or upside
down.
Clean the disc if it is dirty. Insert
the disc correctly if it is
upsidedown. Do not use the
scratched or warped disc.
DISC ERROR (PND)
The CD/MP3·WMA or DVD player
is not operating for some reason.
Eject the disc.
DISC ERROR (PND)
INF6 (LCD)
The temperature of the CD/
MP3·WMA or DVD player has
become unusually high.
Without performing any other
operations, wait until the
temperature comes down
*
.
Pass code incorrect (PND)
- - - - (LCD)
This message is displayed when
the pass code that has been
entered is not correct.
Enter the correct pass code.
Parental lock enabled (PND)
ERR (LCD)
Viewing restrictions are enabled.
Change the setting for viewing
restrictions and start again.(See
page 73)
Currently this function is disabled.
(PND)
- - - - (LCD)
A function that has been disabled
was selected with the menu.
Follow the directions on the
screen and start again.