Dynex DX-DP101 Automobile Accessories User Manual


 
2
7
Storing Your DVD Player in the Main DVD Player Case
Once inserted in the car seat console case, you can store your DVD
player in the main DVD Player case when not in use.
1. Close your DVD player.
2. Unfasten the two elastic snaps.
3. Close and zip the car seat console.
4. Fasten the two elastic snaps to the bottom of the car seat console.
5. Insert the car seat console case in the larger pocket of the DVD
player case and zip the pocket.
DIRECTIONS FOR USING YOUR PORTABLE DVD TRAVEL KIT
This section describes how to insert your DVD player in the car seat
console, how to mount the DVD player in your car and how to store your
DVD player in the DVD travel kit.
The car seat console case
can accommodate a portable
DVD player with a screen
size of up to 10 inches.
1. Remove the car seat
console case from the
main DVD player case.
Removing the viewing
case
Inserting your DVD Player in the Viewing Case
With the DVD kit, you can safely carry your portable DVD player and
DVDs. The DVD kit has storage pockets for your remote control, cables
and other items. In addition, its seat console enables rear-seat
passengers to view DVD movies in the back of your car.
The following is a list of our specific features:
• Both the DVD player case and the seat console are made of rugged
outer materials
• Deluxe high density interior foam padding for superior protection
• Storage pockets for up to 16 DVDs
•Viewing case can accommodate up to 10 inch screen DVD Player
• Storage pockets for accessories, cables and remote
•2 inch expansion zipper increases the outer bag's capacity
• Storage for car seat console bag
• 6 straps for mounting the seat console bag
FEATURES
Mounting the car seat console bag
1. Hold the car seat console between the seats so that the DVD player
is facing rearward.
2. Attach the two lower mounting straps’ swivel clasps to the car seat
console case’s front and rear D-rings closets to the clasps.
You should have attached four swivel clasps, one to each D-ring.
3. Attach the two upper
mounting straps’ swivel
clasps to the car seat
console’s front and rear
D-rings closest to the
clasps.
You should have attached
four more swivel clasps,
one to each D-ring, for a
total of eight.
4. Adjust and tighten each
strap so that the DVD
player is at the desired
viewing angle and car
seat console case is
secure.
Connecting mounting straps to D-rings