Filter
Top Products
PARTS REPLACEMENT MANUAL
FOR
DODGE
®
TORQUE-ARM ™
Speed Reducers
Straight Bore & Taper Bushed
TXT/HXT 309A - 315A - 325A
TXT/HXT 409A - 415A - 425A
TXT/HXT 509B - 515B - 525B
TXT/HXT 609 - 615 - 625
TXT/HXT 709 - 715 - 725
TXT/HXT 305A
TXT/HXT 405A
TXT/HXT 505A
TXT 605
TXT 705
WARNING: Because of the possible danger to persons(s) or property from accidents which may result from the improper use
of products, it is important that correct procedures be followed. Products must be used in accordance with the engineering
information specified in the catalog. Proper installation, maintenance and operation procedures must be observed. The
instructions in the instruction manuals must be followed. Inspections should be made as necessary to assure safe operation
under prevailing conditions. Proper guards and other suitable safety devices or procedures as may be desirable or as may be
specified in safety codes should be provided, and are neither provided by Baldor Electric Company nor are the responsibility of
Baldor Electric Company. This unit and its associated equipment must be installed, adjusted and maintained by qualified
personnel who are familiar with the construction and operation of all equipment in the system and the potential hazards
involved. When risk to persons or property may be involved, a holding device must be an integral part of the driven equipment
beyond the speed reducer output shaft.