Filter
Top Products
CAUTION! (Continued)
•
When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.
REPLACEMENT BULBS
LIGHT BULBS – Interior Bulb No.
Dome Lamp.........................TL212–2
Liftgate Lamp ...........................567
Overhead Console Lamps.............PLW214–2A
Reading Lamp ......................WL212–2
LIGHT BULBS – Exterior Bulb No.
Headlamp .........................9008 H13
Front Park/Turn ......................3157AK
Front Sidemarker.........................168
Back-Up .............................3057K
Center High Mounted Stoplamp .............LED
(serviced at an authorized dealer)
Fog Lamp..........................H109145
License Plate Lamp .......................168
Rear Tail, Stop, Turn Signal................3057K
BULB REPLACEMENT
Headlamp
1. Open the hood.
2. Reach behind the headlamp unit in the engine com-
partment to access the headlamp bulb lock ring.
3. Firmly grasp the lock ring on the back of the headlamp
unit housing.
440 MAINTAINING YOUR VEHICLE