Filter
Top Products
H. Sealant Bottle Replacement
1. Uncoil the Clear Sealant Hose 7.
2. Locate the rectangular SEALANT BOTTLE RELEASE
button in the recessed area where you place your fingers
to unlatch the hoses 6 and 7 from their storage area.
3. Use the Yellow Cap on end of the Clear Sealant Hose
7 to depress the SEALANT BOTTLE RELEASE button.
The Sealant Bottle 1 will pop up. Remove the bottle and
dispose of it accordingly.
4. Clean any remaining sealant from the TIREFIT hous-
ing.
5. Position the new Sealant Bottle 1 to the housing so that
the Clear Sealant Hose 7 aligns with the hose slot in the
front of the housing and the alignment keys on the
bottom of the bottle align with the alignment slots in the
housing. Then, press the bottle into the housing. An
audible click will be heard, indicating the bottle is locked
in place.
6. Verify the Yellow Cap is installed on the fitting at the
end of the Clear Sealant Hose 7 and return the hose to its
storage area.
7. Return the TIREFIT kit to its storage area in the
vehicle.
WHAT TO DO IN EMERGENCIES 191
6