Filter
Top Products
“Light Load” Reset Switch Operation – If
Equipped
•
This vehicle may have different recommended tire
pressure values between the front and rear tires as
shown in both the Tire Loading Information Label and
the Supplemental Tire Pressure Information Label. It is
also equipped to be driven with tire pressures appro-
priate to either a Light Load condition or the vehicle
Max Load condition.
•
The “Light Load” reset switch will allow the driver to
change between the max load inflation pressure (cold)
low pressure warning threshold and the light load
inflation pressure (cold) low pressure warning thresh-
old depending on the vehicle’s load condition. Refer to
the “Supplemental Tire Pressure Information” label for
the vehicle’s Light Load inflation pressures and “Tire
and Loading Information” label for the vehicle’s Max
Load inflation pressures.
Light Load Reset Switch
342 STARTING AND OPERATING