Dodge 2007 DH Ram Automobile User Manual


 
Pair (Link) UConnect™ System to a Cellular Phone
To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone.
NOTE: The UConnect™ system use requires a cellular
phone equipped with the Bluetooth ЉHands-Free Profile,Љ
version 0.96 or higher. See www.chrysler.com/uconnect
for supported phones.
To complete the pairing process, you will need to refer-
ence your cellular phone owner’s manual. One of the
following vehicle specific websites may also provide
detailed instructions for pairing with the brand of phone
that you have:
NOTE:
www.chrysler.com/uconnect
www.dodge.com/uconnect
www.jeep.com/uconnect
The following are general phone to UConnect™ System
pairing instructions:
Press the ’Phone’ button to begin.
After the ЉReadyЉ prompt and the following beep, say
ЉSetup Phone PairingЉ and follow the audible prompts.
When prompted, after the voice on beep, say ЉPair a
PhoneЉ and follow the audible prompts.
You will be asked to say a four-digit pin number,
which you will later need to enter into your cellular.
You can enter any four-digit pin number. You will not
need to remember this pin number after the initial
pairing process.
For identification purposes, you will be prompted to
give the UConnect™ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE