Dodge 2006 Ram SRT-10 Automobile User Manual


 
For identification purposes, you will be prompted to
give the UConnect™ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect™ system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect™ System. The priority allows the
UConnect™ system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect™
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to ЉAdvanced Phone
ConnectivityЉ section).
Dial by Saying a Number
Press the ’Phone’ button to begin.
After the ЉReadyЉ prompt and the following beep, say
ЉDial.Љ
System will prompt you to say the number you want
call.
For example, you can say Љ234-567-8901.Љ The phone
number that you enter must be of valid length and
combination. The UConnect™ limits the user from
dialing invalid combination of numbers. For example,
234-567-890 is nine digits long, which is not a valid
phone number - the closest valid phone number has
ten digits.
The UConnect™ system will confirm the phone num-
ber and then dial. The number will appear in the
display of certain radios.
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE