Filter
Top Products
STARTING PROCEDURES
The starter should not be operated for more than 15-
second intervals. Waiting a few seconds between such
intervals will protect the starter from overheating.
Manual Transmission
Apply the parking brake, place the gearshift control lever
in NEUTRAL and depress the clutch pedal to the floor
before starting the vehicle. This vehicle is equipped with
a clutch interlocking ignition system. It will not start
unless the clutch is fully depressed. Place the ignition
switch in the ON position.
Normal starting of either a cold or a
warm engine does not require pump-
ing or depressing the accelerator
pedal. To start the vehicle, turn the key
to the ON position and press the red
ENGINE START button located on the
Start Button Locator
STARTING AND OPERATING 203
5