Filter
Top Products
7. Reverse procedure to install new Headlamp bulb into
the headlamp assembly.
NOTE: These are Halogen bulbs. Take care not to touch
the bulb with your fingers. Body oils from your fingers
could cause excessive heat buildup which reduces bulb
life.
Front Park and Turn Signal Lamp.
•
Open the hood.
•
Remove the (3) screws attaching the headlamp hous-
ing to the inner panel.
•
Grasp the headlamp and pull firmly to disengage the
headlamp housing from the fender panel.
NOTE: It is not necessary to disconnect the connector to
replace this bulb. If the bulb socket needs replacement
disconnect the connector.
Disconnecting Headlamp Bulb Connector
334 MAINTAINING YOUR VEHICLE