Dodge 2005 ND Dakota Automobile User Manual


 
TIRE CHAINS
Use “Class S” chains only on the rear tires on Dakota
trucks, or other traction aids that meet SAE Type “S”
specifications.
NOTE: Chains must be the proper size for the vehicle,
as recommended by the chain manufacturer.
CAUTION!
To avoid damage to your vehicle, tires or chains, observe the
following precautions:
Because of limited chain clearance between tires and other
suspension components, it is important that only chains in
good condition are used. Broken chains can cause serious
vehicle damage. Stop the vehicle immediately if noise
occurs that could suggest chain breakage. Remove the
damaged parts of the chain before further use.
Install chains as tightly as possible and then retighten after
driving about 1/2 mile (0.8 km).
Do not exceed 45 mph (72 km/h).
Drive cautiously and avoid severe turns and large bumps,
especially with a loaded vehicle.
Do not install tire chains on front wheels of 4x2 vehicles.
Do not drive for a prolonged period on dry pavement.
Observe the tire chain manufacturer’s instructions on
method of installation, operating speed, and conditions for
usage. Always use the lower suggested operating speed of
the chain manufacturer if different than the speed recom-
mended by the manufacturer.
242 STARTING AND OPERATING