Directed Electronics 650 ESP Automobile Alarm User Manual


 
25
©
1999 Directed Electronics, Inc.
To arm the VRS
®
, turn the ignition to the ON position and press the
arm button on the remote transmitter for one second. The parking
lights will flash and the siren will chirp once. This can be done
before driving or while driving the vehicle. Once the system is
armed, it will initiate its triggered sequence (see below) if any door
is opened and closed. If you are forced from the vehicle, the sys-
tem will trigger as the door is opened and closed. This is how the
system works to combat intersection carjacking. To protect against
parking lot carjacking, arm the VRS
®
before leaving the vehicle. The
system will now trigger automatically the next time you or anyone
drives the vehicle. This helps to protect the vehicle if someone
takes your keys and remote transmitter by force in a parking lot.
NOTE: If the VRS
®
system is armed while operating the vehicle and not
disarmed prior to leaving the vehicle, it is still armed and will trigger the
next time the vehicle is driven.
Fifteen seconds after the last door has closed, the system’s status LED
will begin flashing. This delay is intended to allow you time to dis-
tance yourself from your vehicle in the event of a carjacking.
Forty-five seconds later, the siren begins chirping and the parking lights
begin flashing. This time could be used to notify authorities that your
vehicle has been hijacked, and tell them what the VRS
®
will do next.
Fifteen seconds after the siren chirps begin, the siren’s output will
change to a continuous blast.
VRS
®
Triggered Sequence
Arming the VRS
®