Filter
Top Products
20
© 2008 directed electronics
The remote will indicate disarm notification with 2 beeps and 5
flashes of the icon. If disarming after the system has been
triggered, the remote control will send a diagnostic notification
as a reminder. These diagnostic notifications are:
1. If a sensor triggered the system, the remote will emit 4 quick
beeps and the LCD screen will indicate which sensor (5-
flashes) tripped the alarm.
2. If a switch (Zone 1, 3, or 5) triggered the system, the remote
will emit 4 quick beeps and the LCD screen will indicate
which switch (5 flashes) tripped the alarm.
3. If the system was triggered so many times that FACTII is
active the remote will emit the above notifications with 5
beeps instead of 4.