Directed Electronics Matrix1X Automobile Alarm User Manual


 
10
© 2008 directed electronics
Icon
The trunk icon will display for full alarm by flashing for a few
seconds and then display continuously until the page is cleared.
Icon
The shock sensor icon will display for both Warn Away
®
and full
alarm by flashing for a few seconds and then display continu-
ously until the page is cleared.
Icon
The battery icon always displays the current charge capacity
remaining in the remote’s battery.
Icon
The vibrate icon will always display if the remote is programmed
for vibrator notification (see programming LCD remote section
of the guide).
Icon
The ignition icon will display for full alarm by flashing for a few
seconds and then display continuously until page is cleared.
Icon
The vehicle icon always displays the current vehicle (maximum
of 4 vehicles) being controlled by the remote. If a Warn Away
®
or alarm trigger should occur at one of the other vehicles, that
vehicle’s number will be displayed and the LCD will display that
vehicle’s status. To change back to the original vehicle selected,