Filter
Top Products
10
©
2000 Directed Electronics, Inc.
You can prevent your system from automatically activating the
optional Failsafe
®
Starter Kill and locking the doors by using Valet
®
Mode. This is very useful when washing the vehicle or having it
serviced. In Valet
®
Mode, the optional starter kill cannot be acti-
vated, even with the transmitter, but all convenience functions
(door locks, remote start, etc.) will continue to work normally.
To enter or exit Valet
®
Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
®
switch within 10 seconds.
The status LED will light steadily if you are entering Valet
®
Mode
and will turn off if you are exiting Valet
®
Mode.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter. Just
press for 1.5 seconds to enter Panic Mode. In Panic Mode, the
horn will honk and the parking lights will flash for 30 seconds. To
stop Panic Mode at any time, press , , or on the
transmitter.
NOTE: In order for Panic Mode to be effective, the vehicle’s horn (or
optional siren) as well as the vehicle's parking lights must be
connected.
Panic Mode
DRW-35
Valet
®
Mode