Directed Electronics 719T Automobile Alarm User Manual


 
5
©
1999 Directed Electronics, Inc.
Using Your System
You can turn on, or arm, the system by pressing on your trans-
mitter for one second. When the system arms, you will hear a short
siren sound, or chirp, and see the parking lights flash once
(optional). While the system is armed, the status LED will flash
approximately twice per second, indicating that the system is
actively protecting your vehicle.
When armed, your vehicle is protected in the following ways:
Light impacts will trigger the Warn Away
signal. When trig-
gered, the siren will chirp and the parking lights will flash for
a few seconds (optional).
Heavy impacts will trigger the system. The trigger sequence
is 30 seconds of constant siren and flashing parking lights
(optional).
The current sensor monitors the electrical system and can
detect an interior light if a door is opened. If the current sen-
sor is being used to detect door entry, the domelight in the
vehicle must be working and left in the “door” position. If
the domelight does not illuminate when a door is opened, the
current sensor cannot detect the entry.
The optional starter kill prevents the vehicle’s starter from
cranking.
Arming