Filter
Top Products
7
©
1999 Directed Electronics, Inc.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter! Just
press for 1.5 seconds, and you will enter Panic Mode. The siren
will sound for 30 seconds. To stop Panic Mode at any time, press
on the transmitter again.
Shock Sensor Adjustment
The system features a Doubleguard
®
shock sensor inside the control
unit. All adjustments to the sensor are made using the transmitter.
1. Disarm the system by pressing on the transmitter.
2. Within five seconds, press and hold on the transmitter
until the unit generates a long chirp.
3. Release on the transmitter.
Strike the vehicle to test the current setting. If the impact is
detected the unit will chirp three times.
■ If the current setting is acceptable, do nothing and the unit
will exit shock sensor adjustment mode.
To Test and Adjust the Current Warn-Away Setting
Adjusting the Shock Sensor Warn-Away
Panic Mode