Directed Electronics 650 Automobile Alarm User Manual


 
Turning on the ignition key will trip the same two-stage response as
opening a door.
The optional starter kill prevents the vehicle’s starter from cranking.
Armed While Driving
Your system can be armed while driving the vehicle! Simply press
Button I on your transmitter while the vehicle is running.The system will
chirp once and then once more to indicate that the ignition is on. The
system will not respond to any input except the door triggers and the
starter kill relay (if installed) will not be activated. Once you have
reached your destination, the system must be disarmed by pressing
Button I on the transmitter once more.The siren will chirp twice and the
LED will stop flashing. If you do not disarm the system, it will trigger
when any door is opened to exit the vehicle.
Disarming
To turn off, or disarm the system, press Button I again.You will hear two
chirps, and the parking lights will flash twice. If power locks are con-
trolled by the system, the doors will unlock. If the siren chirps either
four or five times when disarming, see Diagnostics section. This is
called Tamper Alert.
Your system includes a High Security Disarm feature. During the trig-
gered sequence, using the transmitter to disarm it will only stop the
triggered sequence (the siren will stop and the parking lights will stop
flashing), however, the system will remain armed and the doors will
stay locked. This is extremely useful if you must stop the system from
sounding, but are unable to check the vehicle visually. The trigger will
stop, but the vehicle will remain protected.
4
© 1994, 1997 Directed Electronics, Inc. 97G432.597