Directed Electronics 571XV Automobile Alarm User Manual


 
31
© 2005 directed electronics—all rights reserved
gglloossssaarryy ooff tteerrmmss
2-Way Remote
: Hand-held, 2-way transceiver which operates the
various functions of your system.
Control Unit:
The “brain” of your system. Usually hidden under-
neath the dash area of the vehicle. The control unit houses the
microprocessor which monitors your vehicle and controls all
system functions.
Failsafe
®
Starter Kill:
An automatic switch controlled by your
system that prevents the vehicle’s starter from cranking whenever
the system is locked. The vehicle is never prevented from
cranking when the system is unlocked, in Valet
®
Mode, or if the
starter interrupt switch itself fails. Your system has feature-ready
circuitry for the starter interrupt, however installation may
require additional labor.
Input:
A physical connection to the system. An input can be
provided by the hood pinswitch or ignition.
Status LED:
A light mounted at a discretionary location inside
the vehicle. It is used to indicate the status of your system.
Valet
®
Button:
A small push-button switch mounted at a discre-
tionary location inside the vehicle. It is used to override the
starter interrupt when a 2-way remote is lost or damaged, or to
enter or exit Valet
®
Mode.