Filter
Top Products
23
© 2008 Directed Electronics - All rights reserved.
Programming options
Programming options control what your system does during nor-
mal op er a tion, and require few or no additional parts. However,
some may require additional in stal la tion labor.
The following is a list of the program settings, with the factory
settings in Bold:
Active• arming (only with the transmitter) or passive arming
(au to mat ic arming 30-seconds after the last door has been
closed).
Arming/disarming confirmation siren chirps • on or off.
The ignition controlled door lock feature on or off: With this •
feature on, the doors will lock three seconds after the igni-
tion is turned on, and unlock when the ignition is turned off.
The system will not lock the doors when the ignition is turned
on with any door open. If your installer is programming the
security system with the Directed Bitwriter, ignition lock and
unlock are independent features and can be programmed
separately.
Passive door locking (with passive arming) or • active door
locking (only when arming with the transmitter). Passive lock-
ing allows the vehicle’s doors to lock when the security system
passively arms (after the 30 second countdown). This feature
only works if passive arming has been programmed.
Note: When programmed for passive arming and active lock, if
the system is disarmed without a door being opened, the system
will relock the doors when it passively rearms.