11
© 2008 Directed Electronics - All rights reserved.
ignition, are now bypassed.
Hold down the •
to begin the Multi-Level Security Arming
cycle over again.
Note: Multi-Level Security Arming only applies to a single arming
cycle. Once the system is disarmed and then re-armed, all the
zones will be active again.
➢ Arming while driving
Your system can be armed while driving the vehicle.
Press
on your transmitter for two seconds while the vehicle is
running or while the ignition is on. The siren chirps once, and then
once more indicating that the ig ni tion is on. The security system
does not respond to any input except the door triggers and the
Failsafe® Starter Kill (if installed) will not activate.
The security system disarms au to mat i cal ly when the ignition is
turned off. The siren chirps twice and the LED stops flashing.
Note: If programmed for the optional Vehicle Recovery System
(VRS®) feature, arming with the transmitter arms the VRS® feature.
(See VRS® section of this guide.)