Filter
Top Products
2
© 2009 Directed Electronics. All rights reserved.
Remote Control Functions
The receiver uses a computer-based learn routine to learn the remote
control buttons. The standard button configuration is described below.
➢ Standard Configuration
Button
The lock function is controlled by pressing
button for one second.
When held for more than 1.5 seconds, Panic is activated.
Button
The unlocking function is controlled by pressing
on the remote
control for one second. You can also turn Panic off with this button.
Button
Silent Mode
™
and an optional auxiliary function are controlled by press-
ing
. Silent Mode works by pressing
for less than one second
before locking or unlocking. An optional trunk release is controlled by
pressing and holding
for 1.5 seconds.
Button
Remote start is activated when you press this button for one second.
+
Buttons
Car Finder is controlled by pressing these two buttons.
+ +
Buttons
When simultaneously pressed these buttons control the rear window
defogger during remote starting.
and
Buttons
Timer mode is activated when you press these buttons.