Directed Electronics 413 Remote Starter User Manual


 
10
© 2009 Directed Electronics. All rights reserved.
Rapid Resume Logic
This Directed Electronics system will store its current state to non-volatile
memory. If power is lost and then reconnected the system will recall the
stored state from memory. This means if the unit is in Locked Mode and
the battery is dis con nect ed for any reason, such as servicing the car,
when the battery is re con nect ed the unit will still be in Locked Mode.
This applies to all states of the system.
Owner Recognition
Owner Recognition is a revolutionary feature avail able only from Di-
rected. Using a Directed Bitwriter
®
hand-held programming tool, your
dealer can program different settings for each trans mit ter that is used
with the system. Then, when a specific transmitter is used, the settings
assigned to that transmitter are recalled. Owner Rec og ni tion lets up to
four users have different settings to meet their specific needs. It is almost
like having four separate alarms in your vehicle, one for each user.
Note: Owner Recognition cannot be programmed without a Bitwriter
®
and the necessary soft ware. Check with your dealer for more informa-
tion.
When using Owner Recognition, only the following features are avail-
able.
Horn function
Ignition locking and unlocking
Activation pulses for remote start