Directed Electronics 4113 Remote Starter User Manual


 
11
© 2008 Directed Electronics. All rights reserved.
Note:
If the ignition is turned on while the vehicle is remote started the
doors will not lock until the remote start shuts off. To avoid being locked
out of the vehicle, do not turn the ignition on until you are ready to drive
the vehicle.
Remote Start
This feature allows you to remotely start and run your vehicle for a
programmable period of time. This makes it possible to warm up the
engine, as well as adjust the interior temperature of the vehicle with
the climate control system. If interior heating or cooling is desired, the
climate controls must be preset, and the fan blower must be set to the
desired level prior to remote starting the vehicle.
Important!
(1) Never remotely start the vehicle with the
vehicle in gear, and (2) Never remotely start the vehicle
with the key in the ignition.
To remote start the vehicle:
Press the single button on the transmitter once.1.
The parking lights will turn ON constant to confirm remote start 2.
operation.
Once the vehicle has started, it will run for the pre-programmed 3.
period of time (12, 24, or 60 minutes) or until a shutdown input is
triggered. This can be set to minute increments by your installer.
When you are ready to drive the vehicle:
Insert the ignition key and turn it to the ON (not the 1.
START) position.
Press the brake pedal.2.
Note:
If the brake pedal is pressed before the key is in