Filter
Top Products
6
©
1999 Directed Electronics, Inc.
and Buttons
An optional auxiliary convenience or expansion function that you
have added to your system can be activated by pressing these but-
tons simultaneously.
The auxiliary output controls _____________________________.
Using Your System
Pressing for one second arms the system and locks the doors.
The red LED will begin to flash once per second. The Failsafe®
Starter Kill will prevent the vehicle’s starter from cranking if it has
been installed. If connected, the vehicle's horn will honk and the
parking lights will flash once to confirm arming of the system. If
the ignition is turned on while armed the horn will honk and the
parking lights will flash (if connected).
NOTE: You must use your remote transmitter to lock the vehicle in order
for the system to be armed. Manually locking the vehicle does not arm
the system; it will only lock the doors. If you have not used the remote
transmitter to lock the vehicle doors (i.e. the vehicle has been locked
using the lock/unlock switch) the transmitter cannot be used to unlock the
doors.
The system also can be programmed to arm the Failsafe® Starter
Kill relay automatically (called passive mode). If the system is pro-
Arming/Locking