Directed Electronics 20.7 Automobile Electronics User Manual


 
25
© 2008 Directed Electronics. All rights reserved.
To activate turbo timer mode with a manual transmission:
Enter MTS mode with the door open. 1.
Transmit the timer mode feature with the remote by pressing2.
AUX
two-times,
and then
AUX
.
After exiting the vehicle, lock the system and the vehicle remains running for 3.
the programmed runtime. (The remote start feature is still enabled).
You can still remote start the vehicle after the turbo timer has timed out and shut
off the vehicle. For safety reasons, if a door is opened (while the system is locked
or unlocked ) while you are away, the remote start exits the manual transmission
mode and does not remote start until the MTS sequence is re-initiated.
Note: An optional push button can be hard wired to the (-) activation input
(H1/10) on the remote start. This allows the user to activate the turbo timer
without having to use the remote.
When the vehicle is running follow the procedures listed above, but instead of
pressing the remote, press the push button the appropriate number of times to ac-
tivate the remote start (factory setting is for 1 pulse). The remote emits the remote
start conrmation tone. Now you can turn off the ignition and exit the vehicle.
The car remains running for the pre-programmed amount of time.