Filter
Top Products
38
© 2004 directed electronics, inc.
➤ Power Saver in Valet
®
Mode: When the system enters Valet
®
Mode the in-vehicle status LED illuminates steadily. If the
vehicle is not used (ignition is not turned on) for a one hour
period while the system is in Valet
®
Mode, the in-vehicle status
LED will shut off. If the system remains in Valet
®
Mode, the in-
vehicle status LED will come back on the next time the ignition
is turned on and then back off.
pprrooggrraammmmiinngg ooppttiioonnss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some
may require installation labor.
The following is a list of the programmable options, with the
factory settings in Bold.
➤
AAccttiivvee
arming (2-way remote only) or passive arming (auto-
matic arming 30 seconds after the last door has been closed).
➤ Arming/disarming siren chirps
oonn
or off.
➤ The ignition controlled door lock feature
oonn
or off: When
this feature is programmed on, the doors will lock three
seconds after the ignition is turned on, and unlock when the
ignition is turned off. If your installer is programming the
security system with the Directed Bitwriter, ignition lock
and unlock are independent features that can be
programmed separately.